Best Auto Clickers for Mac in 2026
Auto clicking on Mac is harder than most people expect. macOS has strict security controls, far fewer free tools than Windows, and every app that wants to move your mouse needs explicit Accessibility permission. That said, there are solid options—from powerful scripting frameworks to simple dedicated apps—and this guide covers them all.
Windows user? If you’re on a Windows PC, TinyTask is one of the lightest, fastest macro recorders available—completely free, no install required. This article focuses exclusively on macOS options. TinyTask does not run on Mac.
The main challenges specific to Mac auto clicking:
- Every tool requires Accessibility permission under Privacy & Security before it can control the mouse.
- macOS Sequoia (15) removed the Control-click Gatekeeper bypass—unsigned apps now require a manual “Open Anyway” step in System Settings.
- Fewer dedicated free options exist compared to Windows. Most polished tools cost money.
- Apple Silicon (M1–M4) compatibility varies—some older tools still require Rosetta 2.
Quick Picks
Open source, Lua scripting, Apple Silicon native, no cost ever. Steep learning curve but unlimited capability.
$36 one-time, visual macro builder, hundreds of actions, polished Mac-native UI, worth every dollar.
Free Homebrew CLI tool. One command installs it, scripts it, and integrates it with shell pipelines and cron jobs.
Below, every tool is reviewed in detail—with honest pros and cons, pricing, and a verdict on who should use it.
7 Best Auto Clickers for Mac Ranked
Ranked by overall value, capability, and ease of use for typical Mac users in 2026.
Hammerspoon is a free, open source macOS automation framework that bridges the operating system to a Lua scripting engine. It is not a one-click auto clicker app—it is a programmable automation platform. That distinction matters. Where a simple auto clicker gives you a text box to set click interval and a start button, Hammerspoon lets you write logic: click here 50 times, move to a new position, wait 200ms, then click again, triggered by a hotkey.
The project is actively maintained on GitHub and runs natively on Apple Silicon. There is no paid tier, no subscription, and no ad-supported version. Installing it takes about two minutes: download the .app, drag it to Applications, launch it, and start writing Lua in ~/.hammerspoon/init.lua.
For auto clicking specifically, the hs.eventtap and hs.mouse modules handle everything. You can fire synthetic click events at any screen coordinate, at any interval, tied to any keyboard shortcut. It handles single clicks, double clicks, right clicks, click-and-drag—all through code.
- Lua scripting for unlimited click logic
- Global hotkeys to start/stop any macro
- Mouse move + click + drag support
- App-specific automation triggers
- Window management built in
- Active GitHub community, frequent updates
- Zero cost, forever
- Apple Silicon native binary
hs.hotkey.bind({“ctrl”}, “F5”, function()
for i = 1, 100 do
hs.eventtap.leftClick(hs.mouse.absolutePosition())
hs.timer.usleep(500000)
end
end)
- Completely free, always
- Extremely powerful and flexible
- Apple Silicon native, fast
- Large community with shared scripts
- Works with macOS Sequoia
- Requires learning Lua scripting
- No GUI—everything is code
- Needs Accessibility permission
- Not beginner-friendly
Keyboard Maestro 11 is the gold standard for Mac automation. Developed by Stairways Software, it has been refined over many years into one of the most polished productivity applications on the platform. The macro editor is visual: you drag actions into a workflow, set conditions, choose triggers, and run. No coding required, though it does support shell scripts and AppleScript actions if you need to go deeper.
For auto clicking, Keyboard Maestro offers dedicated “Click at Found Image” and “Move and Click” actions. You can set up a macro that clicks a specific button on screen, waits for a response, then clicks again—all triggered by a keyboard shortcut or a scheduled timer. The image recognition engine lets macros adapt to slight UI changes rather than relying on fixed pixel coordinates.
The $36 license is a one-time purchase with free updates within a major version. Upgrades to new major versions cost $25. Given how much time it can save on repetitive workflows, the price is easy to justify. A 30-day free trial is available with no feature restrictions.
- Visual drag-and-drop macro builder
- Click at image or coordinate
- 300+ built-in macro actions
- Hotkey, scheduled, or app triggers
- OCR text recognition actions
- Clipboard and text expansion
- Macro groups per application
- Active forum with shared macros
- Most polished Mac automation tool
- No coding required
- Image recognition for robust clicking
- 30-day free trial
- Excellent documentation
- $36 upfront cost
- Paid upgrade for major versions
- Some Sequoia image-click issues reported
- Overkill if you only want basic clicking
BetterTouchTool (BTT) started as a gesture customization app and has grown into a comprehensive input automation tool. It can remap trackpad gestures, mouse buttons, keyboard shortcuts, and the Touch Bar. Auto clicking is one feature among many: you can configure a mouse button held down to repeat-click at a set interval, or set up a shortcut that triggers a series of clicks at defined coordinates.
BTT is not a dedicated auto clicker, but it handles the most common use case—holding a button to keep clicking—well. For users who also want window snapping, gesture shortcuts, and clipboard management in the same tool, it represents exceptional value. Pricing is $10 for a 2-year license or roughly $25 for a lifetime license.
It integrates with Hammerspoon through scripting if you want to combine BTT’s gesture detection with Hammerspoon’s click logic. Both tools coexist without conflict.
- Hold-to-repeat click action
- Trackpad & mouse button remapping
- Keyboard shortcut triggers
- Window snapping and tiling
- Touch Bar customization
- Clipboard manager included
- Regular updates, active developer
- 45-day free trial
- Incredible value for price
- Combines many tools in one
- Long trial period
- Apple Silicon native
- Auto click features not its focus
- Complex UI with many settings
- Not ideal for rapid game clicking
MurGaa’s Auto Clicker is one of the oldest and most consistently maintained dedicated auto clickers for macOS. The UI is old-fashioned by modern standards but immediately understandable: two independent clickers, each with a configurable interval, click type (left, right, double), and location (cursor position or fixed coordinates). Set the interval, hit the hotkey, done.
It works on Apple Silicon via Rosetta 2 or through its Intel binary. MurGaa confirmed compatibility with macOS Sonoma and Sequoia in their FAQ. The trial version runs without time limit but restricts certain features. A 6-month license costs $6.54, which renews if you want continued updates and support.
If you’re coming from Windows where auto clickers are simple, immediate tools, MurGaa’s offering is the closest equivalent on Mac. No scripting, no learning curve—just a dedicated app that clicks when you tell it to.
- Two independent clickers
- Left, right, middle, double click
- Fixed coordinates or cursor position
- Configurable intervals (ms precision)
- Keyboard hotkey toggle
- Random click area option
- macOS Sequoia compatible
- Free trial available
- Simple, purpose-built UI
- Free trial, no time limit
- Works on Sonoma and Sequoia
- Low price for full license
- Subscription-style pricing (6-month)
- Outdated UI design
- M3/M4 support unconfirmed
- Not notarized by Apple
cliclick is a command-line tool that simulates mouse clicks, double-clicks, right-clicks, mouse moves, and key presses. Install it in seconds with brew install cliclick and you can click anywhere on screen from a Terminal command or shell script. No GUI, no subscription, no cost.
The syntax is simple. cliclick c:100,200 clicks at coordinates 100, 200. cliclick dc:500,300 double-clicks. Chain commands: cliclick m:200,200 c:200,200 moves then clicks. Wrap it in a shell loop and you have a scriptable auto clicker that runs as a cron job, a bash function, or part of a larger automation pipeline.
Terminal itself needs Accessibility permission for cliclick to work. On Sequoia, go to System Settings, Privacy & Security, Accessibility, and add Terminal (or whichever shell you use). Works on Apple Silicon Macs through Homebrew’s native ARM builds.
- Left, right, double click commands
- Mouse move to coordinates
- Keystroke simulation
- Shell loop for repeat clicking
- Homebrew install (one command)
- Chain multiple actions in sequence
- Pipe into scripts and cron
- Completely free, open source
brew install cliclick
# Click at x=500, y=300 fifty times, 1s apart
for i in $(seq 1 50); do cliclick c:500,300; sleep 1; done
- Completely free
- One-command install via Homebrew
- Scriptable, pipeable, schedulable
- Works on Apple Silicon
- Command-line only—no GUI
- Requires Homebrew installed
- Terminal needs Accessibility permission
- Not suitable for beginners
Automator and Shortcuts are Apple’s built-in automation tools, available on every Mac at no extra cost. For basic automation, they handle a lot: renaming files in batches, resizing images, combining PDFs, running shell scripts. However, their mouse automation capabilities are limited. Automator can run AppleScript that simulates clicks, but there is no drag-and-drop “click at coordinates” action built in.
Shortcuts, the newer app introduced alongside Apple Silicon, focuses more on app actions and system commands than raw mouse simulation. You can use the “Run AppleScript” action inside Shortcuts to fire clicks, but it is a workaround rather than a designed feature.
For auto clicking specifically, both tools require dropping into AppleScript or shell scripts to do anything useful. At that point, you might as well use cliclick or Hammerspoon directly. The real value here is zero cost and zero install—good for one-off tasks, not for regular auto clicking workflows.
- Already installed on every Mac
- File and app automation actions
- AppleScript integration for clicks
- Shortcuts app for simple workflows
- Schedule via Calendar app
- No install required
- Pre-installed, zero cost
- Good for file and app automation
- Apple-native, no Gatekeeper issues
- Very limited mouse click actions
- Needs AppleScript for real clicking
- Not suited for gaming use cases
- Automator is being phased out
Mac Auto Mouse Click is a different product from MurGaa’s simpler Auto Clicker. Where the basic Auto Clicker lets you click repeatedly at one or two locations, Auto Mouse Click focuses on recording and replaying sequences of clicks across multiple screen positions. You define a list of coordinates with individual delays between each step, then replay the whole sequence on demand.
This makes it better suited for workflows that involve clicking through a series of UI steps—filling in a form, navigating a multi-step process, or running through the same sequence in a game. The interface is utilitarian but functional, and like all MurGaa software it works on macOS Sequoia with the standard Accessibility permission grant.
The pricing model is the same as the basic Auto Clicker: free trial with limitations, then $6.54 for 6 months of full access. For users who need the multi-location sequence feature, it is worth the price. For simple one-location repeat clicking, use the basic Auto Clicker instead.
- Multi-location click sequences
- Per-step delay configuration
- Left, right, middle click types
- Hotkey-triggered playback
- Random coordinate within area
- macOS Sequoia compatible
- Handles multi-step click sequences
- Simple interface for non-coders
- Free trial available
- Subscription-style pricing
- Older UI style
- Keyboard Maestro does this better
Side-by-Side Comparison
All seven tools compared across the criteria that matter most when choosing a Mac auto clicker.
| Tool | Price | Open Source | Apple Silicon | Min macOS | Click Speed | Macro Recording | Best For |
|---|---|---|---|---|---|---|---|
| Hammerspoon | Free | Yes | Native | macOS 12 | Unlimited | Via code | Developers, power users |
| Keyboard Maestro | $36 one-time | No | Native | macOS 10.13 | Configurable | Visual builder | Productivity, workflow automation |
| BetterTouchTool | $10–$25 | No | Native | macOS 11 | Configurable | Limited | Gesture + input automation |
| MurGaa Auto Clicker | Free trial / $6.54 per 6mo | No | Rosetta | macOS 11 | ms precision | No | Simple dedicated clicking |
| cliclick | Free | Yes | Via Homebrew | macOS 10.15 | Script-defined | Shell scripts | Terminal users, scripting |
| macOS Shortcuts / Automator | Free (built-in) | No | Universal | macOS 10.13 | Limited | Basic only | Simple one-off tasks |
| Mac Auto Mouse Click | Free trial / $6.54 per 6mo | No | Rosetta | macOS 11 | ms precision | Sequence playback | Multi-location click sequences |
Setting Up Auto Clickers on macOS
Every auto clicker on Mac needs Accessibility permission before it can simulate mouse events. Here is exactly how to grant it on macOS Sequoia and Sonoma.
Granting Accessibility Permission
Open System Settings
Click the Apple menu in the top-left corner, then select “System Settings.” On older macOS versions this is “System Preferences.”
Navigate to Privacy & Security
Scroll down in the sidebar to “Privacy & Security,” then click “Accessibility” in the right panel. You will see a list of apps with toggle switches.
Add Your Auto Clicker
Click the “+” button to add an app. Navigate to your Applications folder, select the auto clicker app, and click “Open.” For cliclick, add Terminal (or iTerm2) instead.
Enable the Toggle
Toggle the switch next to the app to ON. If the switch is greyed out, click the lock icon at the bottom and enter your Mac password first. Restart the app after enabling.
Gatekeeper and Unsigned Apps
macOS Sequoia changed how Gatekeeper works for unsigned apps. The old Control-click workaround is gone. If an auto clicker is not notarized by Apple, you will see a security warning when you try to open it. Here is the new process:
- Try to open the app normally. macOS will block it and show an alert.
- Go to System Settings > Privacy & Security.
- Scroll down to the Security section—you will see a message about the blocked app.
- Click “Open Anyway” and confirm with your password or Touch ID.
The “Open Anyway” button only appears for 30–60 minutes after the blocked attempt. If you do not see it, try opening the app again to trigger the block, then check Privacy & Security immediately.
Apple Silicon vs Intel Compatibility
Most tools listed here run natively on Apple Silicon (M1 through M4). A few older tools from MurGaa run through Rosetta 2, Apple’s compatibility layer for Intel apps on M-series chips. Rosetta 2 performance is generally good enough for auto clicking, but if you want maximum efficiency, tools with native ARM builds (Hammerspoon, Keyboard Maestro, BetterTouchTool, cliclick via Homebrew) are preferable.
To check if an app is native ARM or Rosetta: right-click the app in Finder, select “Get Info,” and look at the “Kind” field. “Application (Universal)” means it runs natively on both Intel and Apple Silicon. “Application” alone usually means Intel-only via Rosetta.
Common Use Cases for Mac Auto Clickers
Auto clickers on Mac serve a range of legitimate purposes. Here are the most common ones and which tool fits each best.
Gaming — Idle and Clicker Games
Roblox, Cookie Clicker, idle RPGs, and AFK farming all benefit from auto clicking. MurGaa’s Auto Clicker and othyn’s open-source tool are the easiest to set up for gaming on Mac. Keep click intervals human-realistic to avoid in-game detection.
Data Entry and Form Filling
Repetitive form workflows—clicking through the same fields, hitting Next, confirming dialogs—are good candidates for Keyboard Maestro macros. The image recognition engine handles forms that change position across screen sizes.
Software Testing and QA
Testers use auto clickers to simulate user interaction during regression testing. cliclick integrates cleanly into shell-based test scripts. Hammerspoon gives you conditional logic—click here, wait for element, verify result, click next.
Accessibility — Motor Impairment Support
Users with limited hand mobility can use auto clickers to reduce the physical effort of repeated clicking. macOS also has built-in “Dwell Control” in Accessibility settings for hands-free clicking via eye gaze or head movement.
Social Media Management
Liking, scrolling, and engaging with posts across multiple accounts involves a lot of repetitive clicking. BetterTouchTool’s gesture triggers can speed up these workflows significantly, especially combined with keyboard shortcuts.
Repetitive Workflow Automation
Exporting files from multiple apps in sequence, applying the same menu option across dozens of items, bulk screenshot workflows—these are where Keyboard Maestro shines. Its macro groups let you build entire workflows without a line of code.
Mac vs. Windows: Auto Clicker Differences
If you have used auto clickers on Windows before, switching to Mac reveals some clear differences. Here is an honest comparison.
Mac (macOS)
- Fewer free dedicated auto clickers
- Accessibility permission required every time
- Gatekeeper blocks unsigned apps—extra steps needed
- More powerful scripting alternatives (Hammerspoon, KM)
- Built-in Shortcuts/Automator available
- Apple Silicon adds compatibility questions
- macOS sandbox limits misuse by malicious apps
- TinyTask not available
Windows
- Dozens of free auto clickers available
- Most tools work without special permissions
- Run as .exe—no install often needed
- Fewer built-in automation options
- TinyTask: portable, free, instant macro recording
- AutoHotkey for powerful scripting (free)
- x86-64 universal—no architecture questions
- More malicious auto clicker clones to avoid
The bottom line: Windows has more quantity of simple, free auto clickers. Mac has higher quality automation tools overall, but they cost more money or require more setup. If you frequently switch between Mac and Windows, you will want different tools on each platform.
On a Windows PC? TinyTask is the Fastest Option
TinyTask is a 36KB portable recorder—no install, no subscription, no setup. Record any sequence of clicks and replay it instantly. It does not run on Mac, but for Windows users it is hard to beat.
Download TinyTask for WindowsFrequently Asked Questions
Answers to the questions people ask most about auto clicking on Mac.
Is there a free auto clicker for Mac?
Yes, but fewer than on Windows. Hammerspoon is the most capable free option—it is open source, runs natively on Apple Silicon, and supports unlimited click automation through Lua scripting. cliclick is another completely free option available via Homebrew, ideal for terminal users who want command-line clicking. macOS Shortcuts and Automator are built into every Mac and cost nothing, though their mouse click capabilities are limited. MurGaa’s Auto Clicker offers a free trial without a time limit, though the full version requires a paid license after the trial period. For Roblox gaming specifically, othyn’s open-source macOS Auto Clicker on GitHub is a simple, free SwiftUI app that works on Sequoia.
Does TinyTask work on Mac?
No. TinyTask is a Windows-only application. It is a 32-bit .exe file built for the Windows API and has no macOS version, no planned macOS port, and no compatibility through Wine or any emulation layer in any practical sense. If you are on a Mac and looking for a simple macro recorder, the closest alternative in terms of simplicity is MurGaa’s Auto Clicker for basic repeat clicking, or othyn’s macOS auto clicker on GitHub for a free, modern SwiftUI option. For full macro recording with playback, Keyboard Maestro is the Mac equivalent, though it costs $36. If you have a Windows machine available, TinyTask remains one of the best free options on that platform.
How do I allow an auto clicker in macOS security settings?
Open System Settings, then navigate to Privacy & Security, then Accessibility. Click the “+” button, browse to the auto clicker app in your Applications folder, and add it. Toggle the switch next to the app to ON. If the lock icon at the bottom is locked, click it and enter your Mac password first. On macOS Sequoia, if the app is blocked by Gatekeeper (unsigned apps), attempt to open it once, then go to Privacy & Security and look for the “Open Anyway” button in the Security section. You have roughly 30 to 60 minutes after the blocked attempt for that button to appear. After granting Accessibility permission, restart the auto clicker app completely for the permission to take effect.
Do Mac auto clickers work on Apple Silicon (M1/M2/M3/M4)?
Most do, but compatibility varies by how the app is built. Hammerspoon, Keyboard Maestro, BetterTouchTool, and cliclick (via Homebrew) all run as native ARM binaries on Apple Silicon, meaning full performance without any translation layer. MurGaa’s tools run through Rosetta 2 on M-series chips—this works fine, but it is not native. Rosetta 2 performance is generally good enough that you would not notice a difference for auto clicking tasks. The key thing to check before downloading any tool is whether it lists Apple Silicon or “Universal” binary support. Universal binaries work natively on both Intel and M-series Macs. M4 support for most tools can be confirmed either by checking the developer’s documentation or by looking at GitHub issues for the specific app.
Can I use an auto clicker on Mac for Roblox?
Yes, auto clickers work with Roblox on Mac. MurGaa’s Auto Clicker and othyn’s macOS Auto Clicker (GitHub) are both commonly used for Roblox on Mac. The setup is the same as any other app: grant Accessibility permission, set your click interval, and start clicking. The main risk with Roblox is not a platform-wide ban but individual game bans. Roblox itself does not ban accounts for using auto clickers since they do not inject code or modify the game client. However, individual game developers can detect patterns that look automated and issue in-game bans. Games like Bloxburg are known to enforce their own anti-automation rules. To reduce detection risk, use a human-like click interval (200ms or longer rather than the minimum possible) and avoid running auto clickers in competitive or economy-sensitive game modes.
What is the fastest auto clicker for Mac?
Hammerspoon can fire clicks as fast as the system allows—potentially hundreds of clicks per second by reducing the sleep interval in its loop to near zero. cliclick in a tight shell loop can also achieve very high click rates. In practice, most games and applications cannot register input faster than 100 clicks per second anyway, so raw click speed is rarely the limiting factor. For MurGaa’s tools, intervals down to 1 millisecond are configurable, though system-level event processing means actual throughput is lower. If you need maximum speed for a specific task, Hammerspoon with a tight Lua loop is the most configurable option. For gaming, a realistic interval of 50–200ms is usually optimal and less likely to be flagged by any anti-cheat system.
Are auto clickers safe on Mac?
The tools listed in this article are safe. Hammerspoon is open source and auditable. Keyboard Maestro and BetterTouchTool are established, well-reviewed commercial apps from reputable developers. cliclick is a Homebrew formula that the community actively monitors. The risk with auto clickers on Mac comes from downloading unknown apps from random websites rather than official sources. Avoid any auto clicker that asks for administrator privileges beyond what is needed, asks to disable macOS security features, or comes from a site you do not recognize. Stick to Homebrew, the Mac App Store, GitHub releases from verified developers, or well-documented commercial products. Auto clickers that require Accessibility permission are not inherently dangerous—that permission is specifically designed for automation tools and assistive technology.
Can I use Automator as an auto clicker?
Automator does not have a built-in “click at coordinates” action, so it cannot function as a straightforward auto clicker out of the box. You can use Automator’s “Run AppleScript” action with AppleScript that calls System Events to simulate mouse clicks, but the setup is more complex than using a dedicated tool. The relevant AppleScript command is tell application "System Events" to click at {x, y}. This works but is not efficient for rapid repeat clicking. Automator is better suited to file processing tasks, app-based workflows, and system administration. If you want a zero-cost option for occasional clicking automation, the Shortcuts app on macOS Monterey or later is more modern than Automator, though it also requires AppleScript for mouse simulation. For regular auto clicking, any dedicated tool in this list is a better fit than Automator.
What is the best free alternative to TinyTask for Mac?
Hammerspoon is the most capable free alternative in terms of raw power, but it requires writing Lua code. For users who want something closer to TinyTask’s simplicity—click a button, record actions, replay them—othyn’s macOS Auto Clicker on GitHub is a good free option with a modern SwiftUI interface. It supports macOS Big Sur through Sequoia, works on Apple Silicon, and handles basic auto clicking without scripting. MurGaa’s Auto Clicker also has a free trial with no time limit, giving you core features before committing to the license fee. For macro recording with replay (more like TinyTask’s full functionality), there is no perfect free Mac equivalent; Keyboard Maestro at $36 is the closest match in capability, with a 30-day free trial to evaluate before buying.
Do auto clickers work on macOS Sequoia?
Yes, the tools in this list all work on macOS Sequoia (15). The main change Sequoia introduced that affects auto clickers is the Gatekeeper permission flow for unsigned apps. The old Control-click bypass is gone; you now go to System Settings, Privacy & Security, and click “Open Anyway” after an initial blocked launch. Once through Gatekeeper, grant Accessibility permission as usual and the tools function normally. Hammerspoon, Keyboard Maestro, BetterTouchTool, and cliclick have all confirmed Sequoia compatibility. MurGaa confirmed Sequoia support in their FAQ. One known issue: Keyboard Maestro’s image recognition (“Click on Found Image” action) had reports of problems on macOS 15.1.1 specifically—check their forum for the latest status if you rely on that feature.
Can I record and replay macros on Mac?
Yes, though the options differ from Windows. Keyboard Maestro is the most capable macro recorder and replayer on Mac: it records your clicks, keystrokes, and app interactions, then replays them on demand with hotkeys or scheduled triggers. It costs $36. For free macro recording, Hammerspoon can log mouse events and replay them, but this requires writing Lua code rather than using a record button. MurGaa’s Mac Auto Mouse Click records sequences of clicks at multiple locations and replays them, which is a simpler version of macro replay without full keyboard recording. There is no free Mac equivalent of TinyTask’s one-click record-and-replay simplicity. The closest free option that does not require coding is othyn’s macOS Auto Clicker on GitHub, which handles auto clicking at intervals but not full macro recording in the TinyTask sense.
Will an auto clicker get me banned from games on Mac?
It depends heavily on the game. Most games do not detect or care about auto clickers because they only simulate normal mouse clicks—they do not inject code, modify memory, or hook into the game process. Roblox at the platform level does not issue account bans for auto clicking. However, individual Roblox game developers can implement their own detection and banning systems. Competitive online games with active anti-cheat systems (like those using BattlEye or Easy Anti-Cheat) are more likely to detect and penalize automated input patterns. The safest approach: use click intervals of 200ms or longer to mimic human patterns, avoid auto clicking in competitive ranked modes, and check each game’s terms of service. Idle games, clicker games, and single-player titles carry essentially zero ban risk from auto clicking.